Silicone gel for electronics

Silicone gel is a unique sealant for electronic potting and encapsulation. Once mixed at the proper ratio, these non-corrosive, two component silicone compounds will cure to solid rubber.
Silicone gel is optimized for encapsulation of various modules, semi-conductor, IGBT, automotive ECU module, IC chip, weighing sensor, waterproof connector, junction box enclosures, cable splice kits, electrical insulation, and a plethora of potting and encapsulation applications.
And Silicone Dielectric Gel is suitable for sealing and protecting various PCB system assemblies,encapsulation of various modules, semi-conductor, IGBT, automotive ECU module, IC chip, weighing sensor, waterproof connector especially those with delicate components.
The Feature of Silicone Gel:
•Room temperature or heat accelerated cure • Available in clear or red • Heat cure for increased processing speeds      • Low viscosity allows good flow under components
Maxtech supply different grade Silicone can meet all the request.

To play, press and hold the enter key. To stop, release the enter key.

press to zoom
press to zoom
press to zoom
press to zoom
press to zoom
press to zoom
press to zoom
press to zoom
Two Component Dielectric Insulation Silicone Gel

Color: Clear

Packaging: Part A:10 KG/Pot , Part B:10 KG/Pot

The Ratio of A and B: Part A : Part B =1 :1

Cure condition:25°C/24hour, 80°C/30min

Needle penetration: 75

Application: Used for encapsulation of various modules, semi-conductor, IGBT, automotive ECU module, IC chip, weighing sensor, waterproof connector.

Two Component Dielectric Insulation Silicone Gel
dielectric insulation silicone gel

Color: Clear

Packaging: Part A:10 KG/Pot , Part B:10 KG/Pot

The Ratio of A and B: Part A : Part B =1 :1

Cure condition:25°C/6hour, 80°C/30min

Needle penetration: 110mm

Application: Used for encapsulation of various modules, semi-conductor, IGBT, automotive ECU module, IC chip, weighing sensor, waterproof connector.

waterproof dielectric insulating silicone gel

Color: Clear

Packaging: Part A:10 KG/Pot , Part B:10 KG/Pot

The Ratio of A and B: Part A : Part B =1 :1

Cure condition:25°C/1hour, 80°C/15min

Needle penetration:110

Application: Used for encapsulation of various modules, semi-conductor, IGBT, automotive ECU module, IC chip, weighing sensor, waterproof connector.

silicone electrical potting sealant

Color: Light Blue / Transparent

Packaging: Part A:10 KG/Pot , Part B:10 KG/Pot

The Ratio of A and B: Part A : Part B =1 :1

Cure condition:25°C/8hour

Needle penetration:110

Application: Used for encapsulation of various modules, semi-conductor, IGBT, automotive ECU module, IC chip, weighing sensor, waterproof connector.

cable junction box silicone gel

Color: Light Blue / Transparent

Packaging: Part A:10 KG/Pot, Part B:10 KG/Pot

The Ratio of A and B: Part A: Part B =1 :1

Cure condition:25°C/8hour

Needle penetration:110

Application: Used for encapsulation of various modules, semi-conductor, IGBT, automotive ECU module, IC chip, weighing sensor, waterproof connector,semiconductor devices.

soft transparent potting gel for junction box

Color: Transparent

Packaging: Part A:10 KG/Pot, Part B:10 KG/Pot

The Ratio of A and B: Part A: Part B =1 :1

Cure condition:25°C/10hours or 80 ℃/10mins

Needle penetration:80

Application: The cured gel is used in some medical mattresses, headrests, skin stickers, electric parts, IGBT modules, junction boxes, auto control, and inverter.

slef-lealing silicone potting gel for electronic components

Color: Light Blue / Transparent

Packaging: Part A:10 KG/Pot , Part B:10 KG/Pot

The Ratio of A and B: Part A : Part B =1 :1

Cure condition:25°C/8hour

Needle penetration:110

Application: Used for encapsulation of various modules, semi-conductor, IGBT, automotive ECU module, IC chip, weighing sensor, waterproof connector.

Maxtech SI8721 Two Component Flexible Medical Silicone Gel
medical silicone gel

Color: Transparent

Packaging: Part A:10 KG/Pot, Part B:10 KG/Pot

The Ratio of A and B: Part A : Part B =1 :1

Cure condition:25°C/6hour, 120℃/15mins

Application:  

● Suitable for sticking with skin, used for wound stickers, Scar sheet, eye patch and Nipple cover

● Also for filling the cover bag of headrest, seat lumbar pad etc

Dielectric silicone gel

Color: Transparent

Packaging: Part A:10 KG/Pot , Part B:10 KG/Pot

The Ratio of A and B: Part A : Part B =1 :1

Cure condition:25°C/6hour or 80℃, 30mins

Needle penetration:100

Application: Used for encapsulation of various modules, semi-conductor, IGBT, automotive ECU module, IC chip, weighing sensor, waterproof connector.

Waterproof Insulated Silicone gel for IGBT

Color: Transparent

Packaging: Part A:10 KG/Pot , Part B:10 KG/Pot

The Ratio of A and B: Part A : Part B =1 :1

Cure condition:25°C/24hour,80°C /30min

Needle penetration: 75 1/mm

Application: Used for encapsulation of various modules, semi-conductor, IGBT, automotive ECU module, IC chip, weighing sensor, waterproof connector.

Rain light sensors silicone gel

Color: Transparent

Packaging: Part A:10 KG/Pot , Part B:10 KG/Pot

The Ratio of A and B: Part A : Part B =1 :1

Cure condition:80°C /30min

Hardness:10 Shore00

Application:

●Provide a glassy clear appearance to parts manufactured using it. The rubber is an excellent candidate to consider for the cost-efficient manufacture of highly transparent optical parts, with very low modulus.

●Rain-light sensors, camera systems, optical sensors.

High tansparency liquid optical silicone gel

Color: Transparent

Packaging: Part A:10 KG/Pot , Part B:10 KG/Pot

The Ratio of A and B: Part A : Part B =1 :1

Cure condition:23°C /2 hour; 80°C /30min; 120°C /15min

Hardness:60 Shore00

Application:

●Provide a glassy clear appearance to parts manufactured using it. The rubber is an excellent candidate to consider for cost-efficient manufacture of highly transparent optical parts, with very low modulus.

●Rain-light sensors, camera systems, optical sensors.

Liquid Silicone Gel

Color: Transparent/Black

Packaging: Part A:10 KG/Pot , Part B:10 KG/Pot

The Ratio of A and B: Part A : Part B =1 :1

Cure condition:25°C/20~60mins, 80℃/10mins

Hardness: 20~40 Shore 00

Application: Used for encapsulation of various modules, semi-conductor, IGBT, automotive ECU module, IC chip, weighing sensor, waterproof connector.