MGR 295#3 Lubricating silicone grease
We supply OEM & ODM service, You are welcome to test the samples!
Description
MGR 295#3 is a highly efficient silicone oil based, translucent silicone grease for dielectric insulation, surface protection, release and lubrication applications.
Features
Excellent dielectric properties
Excellent water resistance and oxidation resistance
Wide range of operating temperature (-55℃ to 200℃)
Good adhesion to metal, ceramic, rubber and other insulating material surfaces
Excellent corona resistance
Low volatility and oil separation
Typical Application
- Insulation protection
- Waterproof and moisture-proof
- (Ignition systems, insulated switches, transformers, power equipment, hydraulic equipment, cables, etc.)
- Plastic, rubber aging retardants
- Metal surface protectants
- (Ignition system, TV anode cap, battery terminal, cable and connection etc.)
- Good attachment of machine to seal ring
- Electronic seal, potting
Application process
MGR 295#3 can be applied by grease gun, smear, brush.The 10% concentration of MDGR 295#3 can be used by spraying or soaking..
Packaging Specifications
Order code: 1KGR6040
300 ml/piece, 20 kg/barrel, 200 kg/barrel
Save for transport
- In order to maintain all properties of MGR 08 product series, this product should be used within 12 months from the date of production, storage temperature in the original container: 1℃ -30 ℃;
- Use the container as soon as possible after opening. Products after use should not be returned to the original packaging to avoid contamination or counter-effects.
We supply OEM & ODM service, You are welcome to test the samples!
As a manufacturer, we would like to share with you what we have learned about the different types of potting compounds and their characteristics.
The potting compounds on the market vary in viscosity, requirements for cure conditions, among other factors. Compounds such as polyurethane, silicone, and epoxy are widely used in a variety of applications.
Silicone Potting Compounds are soft and flexible, silicone potting compounds and encapsulating materials possess a good level of elongation.Silicone potting compound can also withstand a wide range of temperatures. Most silicone materials are able to operate at temperatures between -40°C and 200°C.
Epoxy potting compounds generally perform as a better adhesive, high-temperature resistance, and chemical resistance and have better adhesion to a wide variety of substrates and typically do not need primers.
Polyurethane Potting Compounds generally have better flexibility, elongation, and abrasion resistance.
Acrylic Potting Compounds are UV and heat-hardening materials, with fast hardening, adequate chemical resistance, and clear appearance.
MGR 295#3 Lubricating silicone grease
MGR 295#3
Appearance
Translucency
Density 25℃, g/cm3
1.0±0.02
Penetration (static, mm1/10)
310-370
Volatile, 24 hours @ 200℃, %
≤2
Oil separation, 24 hours @ 200℃, %
≤0.5
Volume resistance, 200℃, ohm-cm
0.2*1015
Dielectric constant
2.90
Power factor, 100Hz-10MHz
0.001
Dielectric strength, 1.25mm gap, kV/mm
≥18
All the above data were determined or further tested after 7 days of adhesive curing at 25℃, 55%RH.