GEL 6710(2#) is a transparent two-component self-healing silicone gel
We supply OEM & ODM service, You are welcome to test the samples!
 
Description
GEL 6710(2#) is a transparent two-component self-healing silicone gel. After curing, it forms a special soft material with buffering and automatic recovery. It is used to insulate circuit boards from moisture and other harmful contaminants and to provide insulation against high voltages. Another use is to provide stress relief to protect circuits and interconnectors from high temperature and mechanical stress.
l 1:1 additive molding, strong adhesion, self-healing
l High elongation; Excellent flexibility, eliminating mechanical stress
l Very low oil permeability after curing, excellent resistance to toxicity
l High temperature electrical insulation is excellent, to provide protection against high pressure
l Excellent aging resistance and weather resistance
l Excellent waterproof, anticorrosive, moisture-proof, chemical medium resistance
l It can be used in semiconductor modules, connectors, sensors, etc
Typical Applications
Power semiconductor IGBT, load sensor, automotive ECU integrated module and other package protection IC chip, power telecommunication waterproof connector potting and sealing.
 
Operation Use craft
l The A and B components are weighed at a ratio of 1:1, mixed evenly, and injected directly into the components  (or  modules) that  need to  be potting and protected.
Matters needing attention
l Vacuum  defoaming  of  AB  components  after
 

l The potting components can be put to rest and cured at temperature (about 20 minutes under the condition of 80℃), or cured directly at room temperature, which takes about 4 hours.
mixing    can    improve    the    performance    of hardened products
Version 1.01 / 2025-01 /GEL 6710(2#)A/B                                                                                      www.shmaxtech.com
       
l A  and  B  components  should  be  sealed  and stored after use
l GEL  6710(2#) will  be  difficult to  harden  in contact with materials containing sulfur, amine, phosphorus   and   nitrogen   elements,   organic heavy  metal  compounds  (such  as  organotin), peroxides         (diditetris,         didipentasulfide), unsaturated   double    bonds   (such   as    PVC, isocyanate, acetylol alcohol) and other materials
l Component   A    is   configured   with    different
Product packaging
GEL 6710(2#) Clear silicone gel Order Code:
A: 2KSI5177; B: 2KSI5178
l A/B packing is 10kg/pot, 20kg each
l Or A/B are packed in 200kg drums
l Other small specifications or packaging such as aluminum   foil    bags   need   to   consult   and customize
 
We supply OEM & ODM service, You are welcome to test the samples!
As a manufacturer, we would like to share with you what we have learned about the different types of potting compounds and their characteristics.
The potting compounds on the market vary in viscosity, requirements for cure conditions, among other factors. Compounds such as polyurethane, silicone, and epoxy are widely used in a variety of applications.
Silicone Potting Compounds are soft and flexible, silicone potting compounds and encapsulating materials possess a good level of elongation.Silicone potting compound can also withstand a wide range of temperatures. Most silicone materials are able to operate at temperatures between -40°C and 200°C.
Epoxy potting compounds generally perform as a better adhesive, high-temperature resistance, and chemical resistance and have better adhesion to a wide variety of substrates and typically do not need primers.
Polyurethane Potting Compounds generally have better flexibility, elongation, and abrasion resistance.
Acrylic Potting Compounds are UV and heat-hardening materials, with fast hardening, adequate chemical resistance, and clear appearance.