7336 Household appliances Waterproofing Multipurpose silicone adhesive sealant

Product description

SI 7336 series silicone adhesive sealant is a neutral silicone sealing material that absorbs moisture in the air to cure at room temperature. It is non-corrosive to materials, and has good bonding and sealing performance for most plastic and metal materials, protecting electronic products in a stable state under harsh conditions.

The elastomer cured by SI 7336 silicone adhesive sealant has the following characteristics:

Excellent chemical resistance, low odor and good adhesion
Low volatile content does not exceed 300ppm, no corrosion and no fog in closed environment
Resistance to moisture, dirt and other atmospheric components
Reduces mechanical stress and tension caused by mechanical, thermal shock and vibration
Excellent outdoor aging, service life of up to 20-30 years
Stable mechanical and electrical properties at -60-260°C

Fields of Application

Household appliances, construction machinery, photovoltaic module sealing, automotive lamps, LED lamps, PCB board components fixed bonding and sealing

Any inquiry, welcome to contact us +86-18321208486

7336 Household appliances Waterproofing Multipurpose silicone adhesive sealant

Name: 7336 Household appliances Waterproofing Multipurpose silicone adhesive sealant
Brand: Max Tech
Price: 5 USD
Availability: InStock

US$5.00

Color

packing

Electronic Industry silicone sealant for for household appliance, engineering machinery, PV modules, (optional)

0/500

Quantity

Technical parameters before and after curing:

Test items	Test standard	Units	7336 Black	7336 White
Order code	---	---	1KSI3000	1KSI3050
Color	Visual	---	Black	White
Appearance	Visual	---	Paste	Paste
Extrusion rate	/	g/15S,0.4Mpa	50-80	50-70
Density	GB/T 15223-1994	25℃, g/cm3	1.35±0.05	1.45±0.05
Tack-free Time	GB/T13477.5-2002	25℃, 55%RH,min	≤40	≤20
Hardness	GB/T 531.1-2008	Shore A	40±5	40±5
Thermal conductivity	GB/T 10297-2015	W/m.K	0.35	0.35
Elongation at break	GB/T 528-2009	%	≥300	≥300
Tensile strength	GB/T 528-2009	Mpa	≥2.0	≥2.2
Shear strength	GB/T 7124-2008	Mpa, Fe/Fe	≥2.0	≥2.2
Dielectric strength	GB/T 1695-2005	kV/mm（25℃）	22	22
Loss factor	GB/T 1693-2007	(1MHz) (25℃)	0.09	0.09
Dielectric constant	GB/T 1693-2007	(1MHz) (25℃)	2.9	2.9
Volume Resistance	GB/T 1692-2008	(DC500V) Ω· cm	≥1.0*1014	≥1.0*1014

All the above data were determined or further tested after 7 days of adhesive curing at 25℃, 55%RH.

Operation process

Surface treatment: will be sticky or coated surface finish clean, clean with cleaning agent to remove rust, dust and oil. Can be applied to a variety of materials, such as glass, metal and most commonly used industrial plastics, to achieve a bottomless coating bond. However, on some polymers, the bond may be poor, such as polyethylene, polypropylene and PTFE. It is recommended to use MDPM1263 for primer in advance to obtain good bonding effect.

Sizing: Cut the nozzle to the required size and load it into the glue gun. Squeeze the glue solution onto the cleaned surface for an even distribution. When bonding, the adhesive surface can be closed and fixed. At room temperature and 55% relative humidity, the adhesive exposed to the air will complete the "crust" in about 15 minutes. Therefore, all processing must be completed before crusting.

Curing: After finishing the crust, curing will continue from the inside out. The curing depth within 24 hours (room temperature, 50% relative humidity) is approximately 3mm. Very deep, especially sections with difficulty in contact with moisture in the air will require a longer curing time. The lower the relative humidity will extend the curing time. The painted part is placed in the air and can be put into use after curing at room temperature for 24 hours.

Note: After opening, use it as much as possible once, once not used up, and then use it again, after squeezing out the cured part, continue to use without affecting normal use.

Please consult MAXTECH Marketing Department for the use of dispensing equipment.
Fields of Application

Household appliances, construction machinery, photovoltaic module sealing, automotive lamps, LED lamps, PCB board components fixed bonding and sealing
Packing specifications

SI 7336 Black order code: 1KSI3000

300ml/ PCS, 25 PCS/box

2.6L/ PCS, 6 PCS/box

18 kg /5 gallon drum

MDSI 7336 white order code: 1KSI3050

300ml/ PCS, 25 PCS/box

2.6L/ PCS, 6 PCS/box

20 kg /5 gallon drum

Storage and transportation

Store away from light and heat and in tight seal.

This product is non-dangerous goods, transported and stored as general chemicals.

The storage period is 12 months at 25℃. After the storage period, please take a sample for testing.

7336 Household appliances Waterproofing Multipurpose silicone adhesive sealant

∎Technical Data Table

∎Directions for Use

Usage

∎Transport &Storage