6708- 2 Component Transparent Clear Electrical Silicone Gel

We supply OEM & ODM service, You are welcome to test the samples!

Description

GEL 6708 is a transparent two-component self-healing silicone gel. After curing, it forms a special soft material with buffer and automatic recovery. It is designed to insulate circuit boards from moisture and other harmful contaminants and to provide insulation against high voltages. Another use is to provide stress relief to protect circuits and interconnectors from high temperature and mechanical stress.

1:1 additive molding, strong adhesion, self-healing

High elongation; Excellent flexibility, eliminating mechanical stress

Very low oil permeability after curing, excellent resistance to toxicity

High temperature electrical insulation is excellent, to provide protection against high pressure

Excellent aging resistance and weather resistance

Excellent waterproof, anticorrosive, moisture-proof, chemical medium resistance

It can be used in semiconductor modules, sensors, etc

Typical applications

Power semiconductors, electronic sensors, automotive ECU integrated modules and other packaging protection IC chips, undersea fiber pooping and so on.

Product Packaging

GEL 6708 transparent silicone gel, order code: A: 2KSI5440; B(Summer edition) : 2KSI5441; B(Winter edition) : 2KSI5442

Component A: 10 kg/pot
Component B: 10 kg/pot
20kg set

We supply OEM & ODM service, You are welcome to test the samples!

As a manufacturer, we would like to share with you what we have learned about the different types of potting compounds and their characteristics.
The potting compounds on the market vary in viscosity, requirements for cure conditions, among other factors. Compounds such as polyurethane, silicone, and epoxy are widely used in a variety of applications.
Silicone Potting Compounds are soft and flexible, silicone potting compounds and encapsulating materials possess a good level of elongation.Silicone potting compound can also withstand a wide range of temperatures. Most silicone materials are able to operate at temperatures between -40°C and 200°C.
Epoxy potting compounds generally perform as a better adhesive, high-temperature resistance, and chemical resistance and have better adhesion to a wide variety of substrates and typically do not need primers.
Polyurethane Potting Compounds generally have better flexibility, elongation, and abrasion resistance.
Acrylic Potting Compounds are UV and heat-hardening materials, with fast hardening, adequate chemical resistance, and clear appearance.

6708-2 Component Transparent Clear Electrical Silicone Gel

$11.00

$220.00 per 20 Kilograms

Color: Translucent

Quantity

Component A Component B

Appearance Colorless clear liquid Colorless transparent liquid Viscosity,25 ° C CPS 1200-1600900-1300

Specific gravity, g/cm30.990.99

Mix ratioA: B = 100:100 weight ratio

Viscosity after mixing1100-1500 cps

Operating time after mixing25 ℃ for 120-180 minutes

Surface drying time, hr5-9

Hardening conditions10 hours at 25℃ or 30 minutes at 80 ℃

Appearance of hardened substance Colorless clear gel Cone penetration,1/10 mm70-90

Thermal conductivity, W/m.K0.22

Dielectric strength (KV/mm)25

Volume resistance (Ω·cm) DC500V1.0×1015

Loss factor (1 MHz)＜0.001

Dielectric constant (1 MHz)2.8Use temperature range- 60 ∽ 260 ℃
l The A and B components are weighed at a ratio of 1:1, mixed evenly, and injected directly into the components (or modules) that need to be potting and protected.

l The pot-sealed component will stand, the operation time is very fast, and it can be cured in a short time, and the initial curing at normal temperature is about 50-60mins; The operation is suitable for glue filling equipment to implement.
l This product should be stored in A cool and    dry environment below 25℃ , and the storage period of A/B below 25℃ is 1 year.

l The products that exceed the storage period should be tested to confirm whether there is  any abnormality before use.

l Such products are classified as     non-dangerous goods and can be

transported as general chemicals. Be careful of leaks during transportation!
As a manufacturer, we would like to share with you what we have learned about the different types of potting compounds and their characteristics.
The potting compounds on the market vary in viscosity, requirements for cure conditions, among other factors. Compounds such as polyurethane, silicone, and epoxy are widely used in a variety of applications.
Silicone Potting Compounds are soft and flexible, silicone potting compounds and encapsulating materials possess a good level of elongation.Silicone potting compound can also withstand a wide range of temperatures. Most silicone materials are able to operate at temperatures between -40°C and 200°C.
Epoxy potting compounds generally perform as a better adhesive, high-temperature resistance, and chemical resistance and have better adhesion to a wide variety of substrates and typically do not need primers.
Polyurethane Potting Compounds generally have better flexibility, elongation, and abrasion resistance.
Acrylic Potting Compounds are UV and heat-hardening materials, with fast hardening, adequate chemical resistance, and clear appearance.

6708-2 Component Transparent Clear Electrical Silicone Gel

∎Technical Data Table

Precautions

Storage and Transportation

Order & Shipping

Different potting materials