6606Electrical Waterproof Junction Box SiliconeGel

We supply OEM & ODM service, You are welcome to test the samples!

Description

GEL 6606 is a transparent two-component self-healing silicone gel. After curing, it forms a special soft material that is buffered and automatically recovered. It is designed to insulate circuit boards from moisture and other harmful contaminants and to provide insulation against high voltages. Another use is to provide stress relief to protect circuits and interconnectors from high temperature and mechanical stress.

1:1 addition molding, strong viscosity
High elongation; Excellent flexibility, eliminating mechanical stress
Very low oil permeability after curing, excellent resistance to toxicity
High temperature electrical insulation is excellent, to provide protection against high pressure
Long-term use temperature range -50-220℃
Excellent aging resistance and weather resistance
Excellent waterproof, anticorrosive, moisture-proof, chemical medium resistance
It can be used in semiconductor modules, sensors, etc

Typical applications

Power semiconductors, electronic sensors, MEMS Top Coating, automotive ECU integrated modules and other packaging protection IC chips, undersea fiber pooping and so on.

Product Packaging

GEL 6606 Silicone gel, Code: A: 2KSI5570 B: 2KSI5571

We supply OEM & ODM service, You are welcome to test the samples!

As a manufacturer, we would like to share with you what we have learned about the different types of potting compounds and their characteristics.
The potting compounds on the market vary in viscosity, requirements for cure conditions, among other factors. Compounds such as polyurethane, silicone, and epoxy are widely used in a variety of applications.
Silicone Potting Compounds are soft and flexible, silicone potting compounds and encapsulating materials possess a good level of elongation.Silicone potting compound can also withstand a wide range of temperatures. Most silicone materials are able to operate at temperatures between -40°C and 200°C.
Epoxy potting compounds generally perform as a better adhesive, high-temperature resistance, and chemical resistance and have better adhesion to a wide variety of substrates and typically do not need primers.
Polyurethane Potting Compounds generally have better flexibility, elongation, and abrasion resistance.
Acrylic Potting Compounds are UV and heat-hardening materials, with fast hardening, adequate chemical resistance, and clear appearance.

6606Electrical Waterproof Junction Box SiliconeGel

$11.00

$220.00 per 20 Kilograms

Color: Translucent

Quantity

Component A Component B

Appearance Clear fluid Clear fluid

Viscosity,25 ° C CPS 1000±2001000±200S

pecific gravity, g/cm30.990.99

Mix ratio A: B = 100:100 weight ratio

Viscosity after mixing1000±200 cps

Operating time after mixing25℃ for 120-180 minutes

Hardening conditions24 hours at 25℃ or ≤60 minutes at 80℃

Appearance Colorless clear gel

Needle penetration,1/10 mm75±10

Thermal conductivity, W/m.K0.22

Dielectric strength (KV/mm)25

Volume resistance (Ω·cm) DC500V1.0×1015

Loss factor (1 MHz)＜0.001

Dielectric constant (1 MHz)2.8

Use temperature range- 60 ∽ 260 ℃

Temperature range for long-term use-50 ∽ 220 ℃
l The A and B components are weighed at a ratio of 1:1, mixed evenly, and injected directly into the components (or modules) that need to be potting and protected.

l The pot-sealed component will stand, the operation time is very fast, and it can be cured in a short time, and the initial curing at normal temperature is about 50-60mins; The operation is suitable for glue filling equipment to implement.
l This product should be stored in A cool and    dry environment below 25℃ , and the storage period of A/B below 25℃ is 1 year.

l The products that exceed the storage period should be tested to confirm whether there is  any abnormality before use.

l Such products are classified as     non-dangerous goods and can be

transported as general chemicals. Be careful of leaks during transportation!
As a manufacturer, we would like to share with you what we have learned about the different types of potting compounds and their characteristics.
The potting compounds on the market vary in viscosity, requirements for cure conditions, among other factors. Compounds such as polyurethane, silicone, and epoxy are widely used in a variety of applications.
Silicone Potting Compounds are soft and flexible, silicone potting compounds and encapsulating materials possess a good level of elongation.Silicone potting compound can also withstand a wide range of temperatures. Most silicone materials are able to operate at temperatures between -40°C and 200°C.
Epoxy potting compounds generally perform as a better adhesive, high-temperature resistance, and chemical resistance and have better adhesion to a wide variety of substrates and typically do not need primers.
Polyurethane Potting Compounds generally have better flexibility, elongation, and abrasion resistance.
Acrylic Potting Compounds are UV and heat-hardening materials, with fast hardening, adequate chemical resistance, and clear appearance.

6606Electrical Waterproof Junction Box SiliconeGel

∎Technical Data Table

Precautions

Storage and Transportation

Order & Shipping

Different potting materials