Waterproofing Materials
Maxtech Supply the waterproofing coating and waterproofing tapes helps to solve the waterproofing problem.
●Polyurethane Waterproofing Coating
●Acrylic Waterproofing Coating
●MS Waterproofing Coating
●Butyl Waterproofing Tapes
Polyurethane Waterproof coating
Polyurethane waterproof coating is an isocyanate group-containing prepolymer formed by addition polymerization of isocyanate, polyether, etc., with catalyst, anhydrous additives, anhydrous fillers, solvents, etc., processed by mixing and other processes One-component polyurethane waterproof coating.
PU waterproof coating is reactive curing (moisture curing) coating, which has the characteristics of high strength, large elongation, and good water resistance. The ability to adapt to the deformation of the grassroots is strong. Polyurethane waterproof coating is a one-component environmentally friendly waterproof coating for liquid construction. It is based on imported polyurethane prepolymer and has no additives such as tar and asphalt. It is cured after exposure to moisture in the air, forming a strong and tough, jointless integral film on the surface of the base layer.
This waterproofing membrane coating is an ideal long-term solution. Unlike conventional roofing systems, it forms a completely seamless membrane on the roof and incorporates details with ease, and cures in just 24 hours. The Fibretex liquid applied component provides waterproofing for upstands and detailing work.
 |  |  |  |
|---|---|---|---|
 |
∎Product Description
PU-110 is One component reactive moisture-curing one-component Odorless polyurethane with excellent elastic waterproof material. waterproofing solution for refurbishment and new build structures.
∎Key Features
● Odorless, Eco-friendly, No Harm to the Builder;
● Excellent Waterproof, Best Sealing, Bright Color;
● Resistant to Oil, Acid, Alkali, Puncture, Chemical Corrosion;
● Single Component, Self-leveling, Easy to Use, Convenient Operation;
● 800%+ Elongation, Super-bonding without Crack;
● Resistance to Tear, Shifting, Settlement Joint.
∎Typical Applications
● Waterproofing and moisture proofing for kitchen, bathroom, balcony, roof, and so on;
● Anti-seepage of the reservoir, water tower, water tank, swimming pool, bath, fountain pool, sewage treatment pool, and drainage irrigation channel;
● Leak-proofing and anti-corrosion for ventilated basement, underground tunnel, deep well and underground pipe and so on;
● Bonding and moisture proofing of all kinds of tiles, marble, wood, asbestos, and so on;
∎Technical Data Sheet
Main raw material: Polyurethane
Color: Black, White, Blue, Grey, Customized
Density: 1.35±0.1g/cm3
Flowability: Self-leveling
Tack free time: 8hrs
Curing speed : 3~5mm/ 24hrs
Hardness: 20 Shore A
Tensile strength: 2MPa
Elongation at Break: ＞800%
Solid Content: 95%
Application temperature: 5~35°C
Service temperature: -40~90°C
Shelf life: 9 months
∎Directions for Use
Preparation for Operation：
● Tools ：The serrated plastic board, brush, plastic barrels, 30Kg electronics, rubber gloves and cleaning tools like blade .etc
● Environmental requirements：The temperature is 5~35 C and the humidity is 35 ~ 85%RH
● Cleaning：The substrate surface must be solid, dry, and be clean. Such as no dust, grease, asphalt, tar, paint, wax, rust, water repellent, curing agent,
isolating agent, and film. Surface cleaning can be dealt with by removing, cutting, grinding, cleaning, blowing, and so on.
● If there are cracks on the substrate surface, the first step is to fill them, and the surface should be leveled. Operation after the sealant curing more than 3mm.
●Theoretical dosage: 1.0mm thick, 1.3 Kg /㎡coating needed.
Operation：
●First Step
Brushing the part like a corner, tubes root, then symmetrical scraping. The thickness of the coating is generally 0.5mm. (Avoid bubble). When operation, It should be considered about the size, shape, and environment of the construction area.
●Second Step
Symmetrical scraping when the coating is completely solidified (about 12 hours later). The thickness of the coating should be 0.7mm, and the direction of smearing should be perpendicular to the first time. The specific operation is the same as the first step.
●Third Step
Symmetrical scraping when the coating is completely solidified (about 12 hours later). The direction of smearing should be perpendicular to the second time. The specific operation is the same as the first step. The operation times depends on the
design thickness, the overall thickness is 2.0-2.2mm
.
After application
●Protection:
If necessary, a proper protective layer can be operated on the surface of the coating.
●Tools Cleaning :
It can be soaked in toluene or xylene. It is strictly forbidden to immerse in alcohol and other alcohol solvents. If it is not used for a long time, it should be cleaned immediately with alcohol or other organic solvents. The cured glue can only be
scraped or torn off.
∎Attention of operation
● Don’t mix alcohol into the product, it will cause the product invalid. The tools with alcohol can’t be used before cleaning well.
● Avoid contact with eyes and skin. If contact with your skin, scrub first with soap water, or alcohol, then rinse with water. If contact with your eyes, rinse with plenty of water and seek medical treatment immediately.
● It is forbidden to build on the surface of the wet substrate.
●Transportation: Avoid, damp, high temperature, isolation, and rain, far away from heat, handle with care, and prohibit extrusion collision.
● Tools Cleaning: It can be soaked in toluene or xylene. It is strictly forbidden to immerse in alcohol and other alcohol solvents. If it is not used for a long time, it should be cleaned immediately with alcohol or other organic solvents. The cured glue can only be scraped or torn off.
∎Transport &Storage
● Transport: Keep the sealed product away from moisture, the sun, high temperature, and avoid collisions.
● Storage: Keep the sealed product in a cool, dry place.
● Storage temperature: 5~25℃. Humidity: ≤50%RH.
●Cartridge and Sausage:9 months. Pail/Drum:6 months.
More information, TDS is here, please check.
Silicone Waterproofing coating
Silicone waterproof coatings are mainly composed of silicone resin, fillers, additives, etc. Their main characteristics include excellent weather resistance, UV resistance, good waterproof effect, and strong adhesion to the substrate. These properties make waterproof coatings play an important role in the field of building waterproofing and anticorrosion protection.
WS-001 Maxtech Silicone elastic waterproof coating, non-corrosive, high elongation, strong waterproof function. It is specially developed for building exposed roof. The product chemical properties: high and low temperature resistance, ultraviolet resistance, acid and alkali resistance, oil and water resistance and electrical insulation; Excellent adhesion and compatibility; Easy maintenance. It is one of the best weatherproof products available.
 |  |  |  |
|---|---|---|---|
 |  |
∎Product Description
Maxtech WS-001 Silicone elastic waterproof coating, non-corrosive, high elongation, strong waterproof function. It is specially developed for building exposed roof. The product chemical properties: high and low temperature resistance, ultraviolet resistance, acid and alkali resistance, oil and water resistance and electrical insulation; Excellent adhesion and compatibility; Easy maintenance. It is one of the best weatherproof products available.
∎Key Features
● It’s suitable for the underground space of the buildings and the surface of color steel tiles;
●Odorless, Eco-friendly, No Harm to the Builder
●Excellent Aging resistance ,UV Resistance of 25+Years
●Single Component, Easy to Use, Convenient Operation
●300%+ Elongation, Super-bonding without Crack
●Resistance to Tear, Shifting, Settlement Joint
●Weather resistance Corrosion resistance
●Waterproof & UV resistant
●Acid and alkali resistance & Oil and water resistance Electrical insulation
●High and low temperature resistance
∎Typical Applications
● Waterproofing and moisture proofing for kitchen, bathroom, balcony, roof, and so on;
● Anti-seepage of the reservoir, water tower, water tank, swimming pool, bath, fountain pool, sewage treatment pool, and drainage irrigation channel;
● Leak-proofing and anti-corrosion for ventilated basement, underground tunnel, deep well and underground pipe and so on;
● Bonding and moisture proofing of all kinds of tiles, marble, wood, asbestos, and so on;
● Suitable for the underground space of the building and the surface of the color steel tiles;
● Suitable for insulation protection of all kinds of equipment, such as substation equipment, power distribution equipment, transmission equipment etc.;
● Waterproofing of building roof.
∎Technical Data Sheet
Main raw material: Polyurethane
Appearance White, Grey,Black
Density (g/cm³) 1.2±0.1
Tack Free Time (Min) 30
Tensile Strength(Mpa) 1.1～ 1.2
Hardness (shore) 40±5
Full solidification time 48 hours
Elongation at Break (%) ≥300
Solid Content (%) ≥90
Operation Temperature 5-35 ℃
Service Temperature ( ℃) -50~+150 ℃
Shelf Life (Month) 12
∎Directions for Use
Preparation for Operation：
1.Environmental requirements：The temperature is 5~35 C and the humidity is 35 ~ 85%RH
2. Cleaning：The substrate surface must be solid, dry and be clean. Such as no dust,grease, asphalt, tar, paint, wax, rust, water repellent, curing agent, agent and film. Surface cleaning can be dealt with by removing, cleaning, blowing, and so on.
3.Make the substrate surface level：If there are cracks on the substrate surface, first step is to fill them, and the surface should be leveled. Operation after the sealant curing more than 3mm.
4.Construction method:The construction can be scraping,rolling and spraying,generallybrushing2times,the Reference amount of each coating is about1kg/m',the total thickness of the coating film is0.8~1mm,and the Coating interval is4-12h,depending on the weather conditions. Recommend dosage：1-2kg/m
Operation：
●First Step
Brushing the part like a corner, tubes root, then symmetrical scraping. The thickness of the coating is generally 0.5mm. (Avoid bubble). When operation, It should be considered about the size, shape, and environment of the construction area.
●Second Step
Symmetrical scraping when the coating is completely solidified (about 12 hours later). The thickness of the coating should be 0.7mm, and the direction of smearing should be perpendicular to the first time. The specific operation is the same as the first step.
●Third Step
Symmetrical scraping when the coating is completely solidified (about 12 hours later). The direction of smearing should be perpendicular to the second time. The specific operation is the same as the first step. The operation times depends on the
design thickness, the overall thickness is 2.0-2.2mm
.
After application
●Protection:
If necessary, a proper protective layer can be operated on the surface of the coating.
●Tools Cleaning :
It can be soaked in toluene or xylene. It is strictly forbidden to immerse in alcohol and other alcohol solvents. If it is not used for a long time, it should be cleaned immediately with alcohol or other organic solvents. The cured glue can only be
scraped or torn off.
∎Attention of operation
● Don’t mix alcohol into the product, it will cause the product invalid. The tools with alcohol can’t be used before cleaning well.
● Avoid contact with eyes and skin. If contact with your skin, scrub first with soap water, or alcohol, then rinse with water. If contact with your eyes, rinse with plenty of water and seek medical treatment immediately.
● It is forbidden to build on the surface of the wet substrate.
●Transportation: Avoid, damp, high temperature, isolation, and rain, far away from heat, handle with care, and prohibit extrusion collision.
● Tools Cleaning: It can be soaked in toluene or xylene. It is strictly forbidden to immerse in alcohol and other alcohol solvents. If it is not used for a long time, it should be cleaned immediately with alcohol or other organic solvents. The cured glue can only be scraped or torn off.
∎Transport &Storage
● Transport: Keep the sealed product away from moisture, the sun, high temperature, and avoid collisions.
● Storage: Keep the sealed product in a cool, dry place.
● Storage temperature: 5~25℃. Humidity: ≤50%RH.
●Pail/Drum:12 months.
More information, TDS is here, please check.