UV Glue
Core Feature
M.AX.TECH UV curing adhesive, with rapid curing by ultraviolet light as its core, integrates three mature systems: acrylic, silicone, and epoxy, providing an integrated solution for efficiency improvement, cost reduction, quality enhancement, and environmental protection in industrial electronics manufacturing. It is fully compatible with high-end manufacturing scenarios such as new energy vehicles, wind power, intelligent electronics, and PCB protection.
* Ultra-fast curing: Solidifies within a few seconds to tens of seconds under ultraviolet light, significantly increasing production line speed and is suitable for fully automatic coating and assembly line operations.
* Single-component and easy to use: No need for mixing, cures at room temperature, stable in the dark, allowing for easy positioning and adjustment, and simple and efficient construction.
* Environmentally friendly and low consumption: solvent-free, low VOC, and low energy consumption, in line with green production and compliance requirements .
* Stable performance: High transparency, low shrinkage, anti-yellowing, weather-resistant and moisture-resistant, ensuring the reliability of components over the long term .
* Precise Adaptation: Hardness, flexibility, bonding strength, and curing depth can be customized to meet the strict requirements of various scenarios.
Core advantage
Fast: Second-level curing, doubling production capacity
Stable: Weather-resistant and moisture-resistant, providing long-lasting protection
Savings: solvent-free, energy-saving, easy to automate
Comprehensive: The three major systems cover all scenarios of electronics
Expertise: 19 years of experience in adhesives, one-on-one solution support
UV Conformal Coating
UV Conformal Coating is a protective non-conductive dielectric layer applied to printed circuit boards (PCBs). Unlike traditional coatings that dry by solvent evaporation, these materials cure instantly when exposed to specific wavelengths of ultraviolet light.
Key Features
-
Rapid Curing: Transitions from liquid to solid in seconds under UV lamps, significantly increasing production throughput.
-
Eco-Friendly: Most are 100% solids, meaning they contain zero VOCs (Volatile Organic Compounds) and are non-flammable.
-
Dual-Cure Mechanism: To ensure areas blocked by components (shadow areas) are protected, most UV coatings include a secondary moisture or thermal cure that hardens over time without light.
-
Superior Protection: Offers excellent resistance to chemicals, moisture, salt spray, and mechanical abrasion.
-
Inspection Friendly: Usually contains a fluorescent tracer that glows under blacklight (UV) for easy quality control.
Common Use Cases
-
Automotive Electronics: Sensors and ECUs requiring high durability.
-
Consumer Electronics: High-volume smartphone or wearable production.
-
Industrial Controls: Boards exposed to harsh chemical environments.
ACR2342(Rigid adhesive) High Quality UV Curable Conformal Coating
Color: Fluorescent blue clear liquid
Density : 1.05-1.10g/cm³ approx.
Viscosity (mPas): 60CPS, 200CPS
Tack Free : LED tack free
Solid content (%):100%
Curing method: UV Curing (365nm-LED)
Hardness : 85±5 Shore D
Application:
● Hybrid integrated circuits ● Automotive electronic control panel
● Electronic circuit boards ● Aviation instrumentation
● Flexible printed circuit boards ● Computer control panel
● Industrial control board ● Semiconductor crystal line protection
● Appliance controller ● Outdoor LED display
Packaging:
1KG/ barrel, 5L/ barrel; 20L/ barrel
Shelf life : 6 months
ACR 2342 series is a type of one-component, low-viscosity conformal coating (three-proof coating).
This product is a dual-curing system of UV and moisture. The area exposed to UV light can quickly cure to
form a protective layer, while the shadow area can cure through moisture to form a protective layer. It
features fast curing speed, excellent adhesion, resistance to water boiling, damp heat, salt spray, 100%
solid content, and low VOC
Color: Fluorescent blue clear liquid
Density : 1.05-1.10g/cm³ approx.
Viscosity (mPas): 60CPS, 200CPS
Tack Free : LED tack free
Solid content (%):100%
Curing method: UV Curing (365nm-LED)
Hardness : 50-60 Shore D
Application:
● Hybrid integrated circuits ● Automotive electronic control panel
● Electronic circuit boards ● Aviation instrumentation
● Flexible printed circuit boards ● Computer control panel
● Industrial control board ● Semiconductor crystal line protection
● Appliance controller ● Outdoor LED display
Packaging:
1KG/ barrel, 5L/ barrel; 20L/ barrel
Shelf life : 6 months
ACR 2342 series is a type of one-component, low-viscosity conformal coating (three-proof coating).
This product is a dual-curing system of UV and moisture. The area exposed to UV light can quickly cure to
form a protective layer, while the shadow area can cure through moisture to form a protective layer. It
features fast curing speed, excellent adhesion, resistance to water boiling, damp heat, salt spray, 100%
solid content, and low VOC
UV light-curable adhesives, triggered by ultraviolet light for rapid polymerization, achieve instant curing, precise control, environmental friendliness and high efficiency. They are core functional materials for high-end manufacturing in fields such as electronics and electrical engineering, new energy, intelligent manufacturing, and optical and acoustic fields. Max Tech has been deeply engaged in adhesives for 19 years. Relying on a 400+ formula system and a profession- al R&D team, it has established three UV light-curable platforms of acrylic, organic silicone, and epoxy. It provides customized solutions for scenarios such as encapsulation, bonding, sealing, anti-corrosion, heat conduction, and optical and acoustic fields, helping to enhance the efficiency and quality of industrial manufacturing.