PU 8110（6030） Polyurethane potting Sealant

Product features and applications

Polyurethane potting SealantPU 8110（6030） is a two-component solvent-free polyurethane material at room temperature or heat curing. It is light yellow and transparent after curing. It is used for two-component sealing, filling, flame retardant and other fields. The raw material does not contain heavy metals, green environmental protection, wide process operability, high physical properties of the finished product, and good adhesion to the substrate. Room temperature and heating curing can be, can be deep curing, curing less heat, low shrinkage rate; Excellent flexibility after curing, with good flame retardant effect.

Excellent low temperature characteristics, excellent weather resistance

Excellent flame retardancy, 94 V-0

Excellent electrical insulation, stability

Good water resistance, moisture resistance, water absorption is very low

Good adhesion to most metals and plastics

Typical application

This product is often used in electronic capacitors, automotive electronic module potting;
Household appliances such as lampblack stove, microwave oven, rice cooker, washing machine, air conditioning control PCB board filling glue seal;

Life smart toilet, induction toilet, metal induction garbage can circuit board and magnetic coil of moisture and waterproof potting protec

Introducing our PU 8110（6030）Polyurethane potting compound Material, the ultimate solution for potting and sealing applications. This product offers excellent low temperature characteristics, ensuring reliable performance even in extreme conditions. With its impressive weather resistance, the PU 8110（6030） can withstand exposure to the elements without compromising its integrity. In addition, this polyurethane compound boasts excellent flame retardancy, meeting the 94 V-0 standard for safety. Its exceptional electrical insulation properties make it a perfect choice for electronic applications, providing stability and reliability. Furthermore, the PU 8110（6030）exhibits good water resistance, with minimal water absorption, and excellent adhesion to most metals and plastics, ensuring lasting durability in diverse environments. Choose the PU 8110Polyurethane potting Sealant（6030）Polyurethane potting compound Material for superior performance and peace of mind.

PU 8110（6030） Polyurethane potting Sealant

13,00 $

每 30 公斤之價格為 390,00 $

Color

數量

Test items   Units and Conditions   Test standard   A / B
Appearance   A   Visual   Visual   Clear yellow fluid
   B       Visual   Clear yellow fluid
   A+B       Visual   Light yellow translucent fluid
Viscosity   A   25℃ mPa·s   GB/T 2794-2022   250-950
   B       GB/T 2794-2022   150-650
   A+B       GB/T 2794-2022   0.91-1.01
Density   A   25℃ g/cm3   GB/T 13354-1992   1.15-1.15
   B       GB/T 13354-1992   A ： B= 100：100
   A+B       GB/T 13354-1992   ≥30
Mixing ratio   Weight ratio   ----   90-150
Operation time   25℃ min, 100g   GB/T 10247-2008   250-950
Tack free time   25℃,min, 100g   GB/T 10247-2008   150-650
Curing conditions   C /h, 100g   GB/T 10247-2008   25℃/24h or 80℃/1h
Post-cure characteristics
Items   Units or conditions   Test standard   MDPU 8110(6030)
Hardness   Shore-A   GB/T 531.1-2008   35±10
Water absorption   24hrs, 25 ° C, %   GB 8810-2005   <0.3
Dielectric strength   25 ° C, kV/mm   GB/T 1695-2005   >16
Flame resistance   UL-94, grade   ANSI/UL-94-1985   V-0
Application temperature   ℃   GBT 20028-2005   -60-120
Thermal conductivity   W/m.K   GB/T10297-1998   0.2
Volume Resistance   25 ° C, Ω·cm   GB/T 1692-92   >1*1012
Dielectric constant   50Hz, 25 ° C   GB/T 1693-2007   3.0
Process of use

Preheating: Please bake the poured device at 70~80℃ for 1~2 hours, which can also reduce the temperature and extend the heating time to remove the moisture of the device. Bepu 6603 at low temperature, the viscosity will become high, can preheat the material to 25℃~45℃ for easy use.

Mixing: Stir well in the original package of A, and then weigh. Weigh A and B materials in proportion, stir vertically with the mixing rod, and stir clockwise (or counterclockwise) in the same direction for 2 to 3 minutes to minimize the mixing of air. Pay attention to the bottom of the container, the edge of the part should also be stirred evenly, otherwise there will be local non-curing phenomenon.

Defoaming: For those who require smooth and no bubbles on the potting surface, the mixture should be vacuumed (≤-0.1mpa) to remove bubbles. Stirring while vacuuming dynamic debubbling, more conducive to the removal of bubbles. If mechanical metering is used for mixed potting, steps 2 and 3 are omitted.

Pouring: Pour the mixture into the device, the device structure is complex, large volume, should be divided pouring. The pouring bubbles can be blown with a hot air gun. Surface bubbles can be eliminated.

Curing: 25℃/24h or 80℃/1h can be cured. The ambient humidity should be controlled at <70%, and the curing time should be extended when the temperature is low.

In the case of insufficient curing time or low room temperature environment, the surface will be sticky the next day is normal, and it will gradually disappear after a few days.

The curing condition of potting glue is affected by temperature and glue amount, high temperature is short curing time, more glue amount is fast curing speed, and vice versa.
Unused raw materials should be stored in a well-sealed bucket to avoid moisture intrusion and affect the quality of raw materials. The opened materials should be kept sealed and used up as soon as possible.

It is recommended to store in a cool area, away from direct sunlight;

Storage temperature: 10-30℃, A material storage period of 12 months; Material B is 6 months.
As a manufacturer, we would like to share with you what we have learned about the different types of potting compounds and their characteristics.
The potting compounds on the market vary in viscosity, requirements for cure conditions, among other factors. Compounds such as polyurethane, silicone, and epoxy are widely used in a variety of applications.
Silicone Potting Compounds are soft and flexible, silicone potting compounds and encapsulating materials possess a good level of elongation.Silicone potting compound can also withstand a wide range of temperatures. Most silicone materials are able to operate at temperatures between -40°C and 200°C.
Epoxy potting compounds generally perform as a better adhesive, high-temperature resistance, and chemical resistance and have better adhesion to a wide variety of substrates and typically do not need primers.
Polyurethane Potting Compounds generally have better flexibility, elongation, and abrasion resistance.
Acrylic Potting Compounds are UV and heat-hardening materials, with fast hardening, adequate chemical resistance, and clear appearance.
Packing Specifications

PU 8603 Black Two-component polyurethane potting compound Order Code:

A: 2KPU2016; B: 2KPU2014

PU 8603 Natural two-component polyurethane potting compound Order Code:

A: 2KPU2013; B: 2KPU2014

PU 8603 White two-component polyurethane potting compound Order Code:

A: 2KPU2015; B: 2KPU2014

Component A: 10kg/ pot

Component B: 10kg/ pot

PU 8110（6030） Polyurethane potting Sealant

∎Technical Data Table

Process of use

Storage and Transportation

Order & Shipping

Different potting materials

Order packing