UV Glue
Core Feature
M.AX.TECH UV curing adhesive, with rapid curing by ultraviolet light as its core, integrates three mature systems: acrylic, silicone, and epoxy, providing an integrated solution for efficiency improvement, cost reduction, quality enhancement, and environmental protection in industrial electronics manufacturing. It is fully compatible with high-end manufacturing scenarios such as new energy vehicles, wind power, intelligent electronics, and PCB protection.
* Ultra-fast curing: Solidifies within a few seconds to tens of seconds under ultraviolet light, significantly increasing production line speed and is suitable for fully automatic coating and assembly line operations.
* Single-component and easy to use: No need for mixing, cures at room temperature, stable in the dark, allowing for easy positioning and adjustment, and simple and efficient construction.
* Environmentally friendly and low consumption: solvent-free, low VOC, and low energy consumption, in line with green production and compliance requirements .
* Stable performance: High transparency, low shrinkage, anti-yellowing, weather-resistant and moisture-resistant, ensuring the reliability of components over the long term .
* Precise Adaptation: Hardness, flexibility, bonding strength, and curing depth can be customized to meet the strict requirements of various scenarios.
Core advantage
Fast: Second-level curing, doubling production capacity
Stable: Weather-resistant and moisture-resistant, providing long-lasting protection
Savings: solvent-free, energy-saving, easy to automate
Comprehensive: The three major systems cover all scenarios of electronics
Expertise: 19 years of experience in adhesives, one-on-one solution support
UV Conformal Coating
UV Conformal Coating is a protective non-conductive dielectric layer applied to printed circuit boards (PCBs). Unlike traditional coatings that dry by solvent evaporation, these materials cure instantly when exposed to specific wavelengths of ultraviolet light.
Key Features
-
Rapid Curing: Transitions from liquid to solid in seconds under UV lamps, significantly increasing production throughput.
-
Eco-Friendly: Most are 100% solids, meaning they contain zero VOCs (Volatile Organic Compounds) and are non-flammable.
-
Dual-Cure Mechanism: To ensure areas blocked by components (shadow areas) are protected, most UV coatings include a secondary moisture or thermal cure that hardens over time without light.
-
Superior Protection: Offers excellent resistance to chemicals, moisture, salt spray, and mechanical abrasion.
-
Inspection Friendly: Usually contains a fluorescent tracer that glows under blacklight (UV) for easy quality control.
Common Use Cases
-
Automotive Electronics: Sensors and ECUs requiring high durability.
-
Consumer Electronics: High-volume smartphone or wearable production.
-
Industrial Controls: Boards exposed to harsh chemical environments.
ACR2342(Rigid adhesive) High Quality UV Curable Conformal Coating
Color: Fluorescent blue clear liquid
Density : 1.05-1.10g/cm³ approx.
Viscosity (mPas): 60CPS, 200CPS
Tack Free : LED tack free
Solid content (%):100%
Curing method: UV Curing (365nm-LED)
Hardness : 85±5 Shore D
Application:
● Hybrid integrated circuits ● Automotive electronic control panel
● Electronic circuit boards ● Aviation instrumentation
● Flexible printed circuit boards ● Computer control panel
● Industrial control board ● Semiconductor crystal line protection
● Appliance controller ● Outdoor LED display
Packaging:
1KG/ barrel, 5L/ barrel; 20L/ barrel
Shelf life : 6 months
ACR 2342 series is a type of one-component, low-viscosity conformal coating (three-proof coating).
This product is a dual-curing system of UV and moisture. The area exposed to UV light can quickly cure to
form a protective layer, while the shadow area can cure through moisture to form a protective layer. It
features fast curing speed, excellent adhesion, resistance to water boiling, damp heat, salt spray, 100%
solid content, and low VOC
ACR2342F High Performance UV Curable Conformal Coating
Color: Fluorescent blue clear liquid
Density : 1.05-1.10g/cm³ approx.
Viscosity (mPas): 60CPS, 200CPS
Tack Free : LED tack free
Solid content (%):100%
Curing method: UV Curing (365nm-LED)
Hardness : 50-60 Shore D
Application:
● Hybrid integrated circuits ● Automotive electronic control panel
● Electronic circuit boards ● Aviation instrumentation
● Flexible printed circuit boards ● Computer control panel
● Industrial control board ● Semiconductor crystal line protection
● Appliance controller ● Outdoor LED display
Packaging:
1KG/ barrel, 5L/ barrel; 20L/ barrel
Shelf life : 6 months
ACR 2342F series is a type of one-component, low-viscosity conformal coating (three-proof coating).
This product is a dual-curing system of UV and moisture. The area exposed to UV light can quickly cure to
form a protective layer, while the shadow area can cure through moisture to form a protective layer. It
features fast curing speed, excellent adhesion, resistance to water boiling, damp heat, salt spray, 100%
solid content, and low VOC
ACR2103 One Component Low Viscosity UV Curable Conformal Coating ( three proof coating)
Color: Fluorescent blue clear liquid
Density : 1.05-1.10g/cm³ approx.
Viscosity (mPas): 300CPS
Tack Free : LED tack free
Solid content (%):100%
Curing method: UV Curing (365nm-LED)
Hardness : 55±5 Shore D
Application:
● Hybrid integrated circuits ● Automotive electronic control panel
● Electronic circuit boards ● Aviation instrumentation
● Flexible printed circuit boards ● Computer control panel
● Industrial control board ● Semiconductor crystal line protection
● Appliance controller ● Outdoor LED display
Packaging:
1KG/ barrel, 5L/ barrel; 20L/ barrel
Shelf life : 6 months
ACR 2103 series is a type of one-component, low-viscosity conformal coating (three-proof coating). This product is a pure UV curing system. The areas exposed to UV light can quickly cure to form a protective layer. It features fast curing speed, excellent adhesion, resistance to water boiling, damp heat, salt spray, 100% solid content, and low VOC.
ACR2103A One Component Low Viscosity UV Curable Conformal Coating ( three proof coating)
Color: Fluorescent blue clear liquid
Density : 1.05-1.10g/cm³ approx.
Viscosity (mPas): 40CPS
Tack Free : LED tack free
Solid content (%):100%
Curing method: UV Curing (365nm-LED)
Hardness : 85±5 Shore D
Application:
● Hybrid integrated circuits ● Automotive electronic control panel
● Electronic circuit boards ● Aviation instrumentation
● Flexible printed circuit boards ● Computer control panel
● Industrial control board ● Semiconductor crystal line protection
● Appliance controller ● Outdoor LED display
Packaging:
1KG/ barrel, 5L/ barrel; 20L/ barrel
Shelf life : 6 months
ACR 2103A series is a type of one-component, low-viscosity conformal coating (three-proof coating). This product is a pure UV curing system. The areas exposed to UV light can quickly cure to form a protective layer. It features fast curing speed, excellent adhesion, resistance to water boiling, damp heat, salt spray, 100% solid content, and low VOC.
UV elastic sealing ring Adhesive
UV elastic sealing ring adhesive is a single-component, UV-curable polymer adhesive specifically formulated for bonding UV-resistant elastic sealing rings to various substrates. Designed for rapid assembly lines and outdoor applications, this adhesive combines excellent adhesion strength with UV-stabilized properties, ensuring long-term performance in harsh environmental conditions.
Core Advantages
-
Rapid UV Curing: Achieves full curing in 5-30 seconds under UV light (365nm wavelength), enabling high-speed production lines with 600+ units per hour
-
UV & Weather Resistance: Formulated with UV absorbers and hindered amine light stabilizers (HALS), maintains 90%+ adhesion strength after 2000 hours of QUV accelerated aging
-
Elastic Compatibility: Matches the elongation properties of UV sealing rings (up to 300% elongation), preventing bond failure due to thermal expansion or mechanical stress
-
Versatile Adhesion: Bonds effectively to silicone, fluorosilicone, EPDM sealing rings and metal/plastic substrates (aluminum, stainless steel, PC, ABS)
-
Environmental Compliance: RoHS, REACH compliant, solvent-free formula with low VOC emissions (<10g/L)
-
Typical Applications
-
Outdoor electrical enclosures and solar panel sealing systems
-
Automotive door/window sealing ring assembly
-
Aerospace and marine equipment waterproof sealing
-
HVAC systems and refrigeration unit gaskets
-
Medical device sealing components with sterilization compatibility
ACR2103A One Component Low Viscosity UV Curable Conformal Coating ( three proof coating)
Color: Fluorescent blue clear liquid
Density : 1.05-1.10g/cm³ approx.
Viscosity (mPas): 40CPS
Tack Free : LED tack free
Solid content (%):100%
Curing method: UV Curing (365nm-LED)
Hardness : 85±5 Shore D
Application:
● Hybrid integrated circuits ● Automotive electronic control panel
● Electronic circuit boards ● Aviation instrumentation
● Flexible printed circuit boards ● Computer control panel
● Industrial control board ● Semiconductor crystal line protection
● Appliance controller ● Outdoor LED display
Packaging:
1KG/ barrel, 5L/ barrel; 20L/ barrel
Shelf life : 6 months
ACR 2103A series is a type of one-component, low-viscosity conformal coating (three-proof coating). This product is a pure UV curing system. The areas exposed to UV light can quickly cure to form a protective layer. It features fast curing speed, excellent adhesion, resistance to water boiling, damp heat, salt spray, 100% solid content, and low VOC.