SI 7333 White/Black Flame retardant silicone adhesive

Product description

SI 7333 silicone adhesive is a fluid moisture absorption curing silica gel, after curing to form a flexible rubber body, the vast majority of materials have a good bonding and sealing performance, protect electronic products under harsh conditions in a stable state.

The elastomer of SI 7333 silicone adhesive after curing has the following characteristics:

One component, easy to use, short non-stick time
Excellent chemical resistance
Resistance to moisture, dirt and other atmospheric components
Reduces mechanical stress and tension caused by mechanical, thermal shock and vibration
Excellent electrical insulation and corona resistance
Excellent outdoor aging, service life of up to 20-30 years
Stable mechanical and electrical properties at -60-260 ° C

Fields of Application

Plastic metal housing seal; PCB board components, wiring harness fixed
Exquisite electronic parts, waterproof coating for electrical and communication equipment
Small modules, photoelectric display and circuit board, under 6mm thin layer potting, plugging

Any inquiry, welcome to contact us +86-18321208486

SI 7333 White/Black Flame retardant silicone adhesive

Name: SI 7333 White/Black Flame retardant silicone adhesive
Brand: Max Tech
Price: 5 USD
Availability: InStock

5,00 US$

Color

packing

Electronic Industry silicone sealant for for household appliance, engineering machinery, PV modules, (opcional)

0/500

Quantidade

Various technical parameters before and after curing:

Test items	Test standard	Units	7333
Before cured
Color	Visual	---	White/ Black
Viscosity	GB/T 2794-2013	25℃, mPa·s	8000 ± 2000
Density	GB/T 15223-1994	25℃, g/cm3	1.13-1.23
Tack-free Time	GB/T13477.5-2002	25℃, 55%RH,min	≤10
After cured
Hardness	GB/T 531-2008	Shore A	30-40
Thermal conductivity	GB/T 10297-1998	W/m.K	0.45
Elongation at break	GB/T 528-1998	%	≥150
Tensile strength	GB/T 528-2009	Mpa	>1.0
Shear strength	GB/T 7124-2008	Mpa, Fe/Fe	>0.6
Dielectric strength	GB/T 1695-2005	kV/mm（25℃）	20
Loss factor	GB/T 1693-2007	(1MHz) (25℃)	0.09
Dielectric constant	GB/T 1693-2007	(1MHz) (25℃)	2.9
Volume Resistance	GB/T 1692-92	(DC500V) Ω· cm	≥1.0*1014

All the above data were determined after 7 days of curing at 25℃ and 55%RH. The company is not responsible for the different data caused by different test conditions or product improvement.

Operation process

Clean the surface: the surface of the sticky or coated material is cleaned, and the rust, dust and oil are removed with cleaning agent.

Sizing: Cut the nozzle to the required size and load it into the glue gun. Squeeze the glue solution onto the cleaned surface for an even distribution. When bonding, the adhesive surface can be closed and fixed.

Solidification: curing process is a curing process from the surface to the inside, within 24 hours (room temperature and 55% relative humidity) glue will cure 2 ~ 4mm depth, if the glue position is deep, especially not easy to access to the air, the full curing time will be extended, if the temperature is low, curing time will also be extended, It takes more than 3 days for the 6mm thick sealant to fully cure.

Precautions: use as much as possible once after opening, once not used up, when used again, squeeze out the cured part, continue to use, does not affect normal use.

Please consult MDTECH Marketing Department for dispensing equipment.
Fields of Application

Plastic metal housing seal; PCB board components, wiring harness fixed

Exquisite electronic parts, waterproof coating for electrical and communication equipment

Small modules, photoelectric display and circuit board, under 6mm thin layer potting, plugging
Packaging Specifications

SI 7333 White, order code :1KSI1150

SI 7333 Black, order code :1KSI1152

300ml/ PCS, 25 PCS/box

2.8kg/ PCS, 6 PCS/box

Storage and transportation

Store away from light and heat and in tight seal.

This product is non-dangerous goods, transported and stored as general chemicals.

The storage period is 9 months at 25℃. After the storage period, please take a sample for testing.

It is best to use it within 9 months, otherwise it may cause the surface drying time to slow down, but the performance will not be affected.

SI 7333 White/Black Flame retardant silicone adhesive

∎Technical Data Table

∎Directions for Use

Usage

∎Transport &Storage