Maxtech Coat7007 Silicone Conformal Coating for Electronics Waterproof Insulating Sealant

We supply OEM & ODM service, You are welcome to test the samples!

Produts

COAT 7007 is an organosilicone resin triple-resistant material for surface coating of electronic components, which is suitable for the environment with a temperature of -60-200℃ . This product is suitable for PCB board surface coating, insulation, moisture, water and rust, bright and smooth surface, high mechanical strength, highly transparent paint film, anti-leakage, shock, dust, corrosion, anti-aging, corona resistance, and other properties.In addition, the coating protective film is also conducive to the line and components of friction resistance, solvent resistance, and can release the pressure caused by periodic changes in temperature. It can fully protect the wire panel in a variety of chemical corrosion, salt spray, moisture, high pollution and dust, vibration and high and low temperature and other harsh environment without affecting its work and signal.

Features

l Single component room temperature siliconel Curing can also be promoted by heating

l Medium viscosity, suitable for brush, spray, dip coating a variety of processes

l After curing to form a certain hardness, anti-wear transparent elastic protective film

l It has good adhesion to various circuit boards

l Good resistance to high and low temperature and flame retardant performance

l UL No.:E547822

Typical application

l Hybrid integrated circuitsl Automotive electronic control panel

l Electronic circuit boardsl Aviation instrumentation

l Flexible printed circuit boardsl Computer control panel

l Industrial control board

l Semiconductor crystal line protection

l Appliance controllerl Outdoor LED display

We supply OEM & ODM service, You are welcome to test the samples!

Silicone Conformal Coating for Electronics Waterproof Insulating Sealant

‏15.00 US$

‏375.00 US$ لكل 25 كجم

Color

الكمية

Item   COAT 7007
Color   Transparent
Features   Flowing liquid
Curing method   Cure at room temperature or with heat
Viscosity (mPas)   800±100
Specific gravity (g/cm3)   1.05-1.10
Solid content (%)   70±2
Warranty period (months)   12
Surface cure (25 ° C 75%RH) for min   < 15
Warm surface curing time (60~80℃ 50%RH) min   3-5
Full hardening time (25 ° C 50%RH) H   24
Electrical/mechanical properties (cure for 7 days at temperature 25℃ humidity 75%)
Hardness (shore A)   ≥80
Applicable temperature range (C)   -60 - 200
Linear expansion coefficient (DMA, -65~25℃, 5℃/min)   2.58 x 10-4
Dielectric strength (kv/mm) IPC-TM-650   ≥16
Dielectric constant (1.2MHz))   2.8
Volume Resistance (Ohm/cm) IPC-TM-650   ≥1.0 × 1015
The following data are performance tested after 7 days at room temperature

Technical Data Sheet
COAT 7007 Silicone conformal coating
Adhesion   Hundredfold method   5B
Moisture-proof insulation properties   IPC-CC-830B   Pass
Electromigration   IPC-SM-840C   /
Electrical Corrosion   IPC-CC-830B   /
High and low temperature shock   - 45-125 ℃   Pass
Hydrolytic stability   IPC-CC-830B   Pass
Salt spray test   5% NaCl solution /pH 6.5-7.2/35 ° C   Pass
Antifungal test   ASTM G21   Pass
Flame retardant test   UL94-V0 coating substrate test   Pass
l This product should be stored in A cool and    dry environment below 25℃ , and the storage period of A/B below 25℃ is 1 year.

l The products that exceed the storage period should be tested to confirm whether there is  any abnormality before use.

l Such products are classified as     non-dangerous goods and can be

transported as general chemicals. Be careful of leaks during transportation!
As a manufacturer, we would like to share with you what we have learned about the different types of potting compounds and their characteristics.
The potting compounds on the market vary in viscosity, requirements for cure conditions, among other factors. Compounds such as polyurethane, silicone, and epoxy are widely used in a variety of applications.
Silicone Potting Compounds are soft and flexible, silicone potting compounds and encapsulating materials possess a good level of elongation.Silicone potting compound can also withstand a wide range of temperatures. Most silicone materials are able to operate at temperatures between -40°C and 200°C.
Epoxy potting compounds generally perform as a better adhesive, high-temperature resistance, and chemical resistance and have better adhesion to a wide variety of substrates and typically do not need primers.
Polyurethane Potting Compounds generally have better flexibility, elongation, and abrasion resistance.
Acrylic Potting Compounds are UV and heat-hardening materials, with fast hardening, adequate chemical resistance, and clear appearance.
Surface treatment: Before coating, dust, moisture (moisture) and oil should be removed from the surface of the

object to be coated and kept dry.

Cover: If some connectors, sockets, switches, inserts and other areas are not allowed to have coating materials. Appropriate covering measures should be taken.

Construction: According to the complexity of PCB, device distribution density and configuration can be used brush coating, spray, dip coating and other different methods of construction. For a small amount of spraying, manual spray gun can be used, automatic spraying, and 100% paint can be used directly. The amount of spray pressure will depend on the specific type of spray equipment used, and the effect goal is that the coating does not hang and does not leak. The thickness of a coating film is generally between 0.1-0.4mm, if you want to get a thicker coating, it is best to get by applying two layers of thinner coating, and it is required that the first layer must be completely dried before being allowed to apply the second layer.

Curing: Flat on the support after construction, can be cured at room temperature. Heating can speed up the curing speed, the recommended heating temperature of 50℃-60℃ 5-10 mins.

Room temperature curing: coating is cured at room temperature by reacting with water vapor. The coating of 0.1mm will reach surface drying in about 10min, and it will take 72 hours to cure completely. The recommended curing conditions are 25℃ and at least 50% relative humidity, and increasing the temperature and humidity can speed up the curing speed.

Heating curing: heating can shorten the surface drying time of the product. Generally 0.1mm thick coating needs to volatilize at room temperature for 10min. If the coating has fish eyes or contains air bubbles, allow more time for the glue to level out before heating up. Boards coated with 9060 should be stored at room temperature for at least 72 hours before low temperature testing.

Repair: Repair an already coated component by simply touching the soldering iron directly to the coating to remove the component. Then install a new component, and clean the area with a brush or solvent; It can also be cleaned with solvent; And reapply with paint after drying.

Silicone Conformal Coating for Electronics Waterproof Insulating Sealant

∎Technical Data Table

Storage and Transportation

Order & Shipping

Different potting materials

Application process